7 Ways to Check for Water Damage in Your Stucco Home

7 Ways to Check for Water Damage in Your Stucco Home

1. Damp Looking Stucco

It should be fine if the stucco gets wet now and again. When it has rained, the fact that it is wet will make sense. Even if the stucco is still moist a week after the storm, it shows that water has permeated it. There may be patches of the wall that are continually damp. Pay extra attention to these since water may enter through them.

2. Cracks 

A crack in your stucco is an evident sign that there is water in it. Though it does not usually indicate permanent injury, you should not be concerned. Because it indicates that water has entered the structure, you must act quickly to prevent matters from worsening.

3. Missing Chunks of Stucco

Examine your stucco for any siding pieces that have pulled off. Water has gotten underneath and is causing problems, as seen by surface damage.

4. Cracks and Bubbles at the Bottom of the Wall

Look for cracks or bubbles at the bottom borders throughout your examination. Water, like everything else, is subject to gravity and will ultimately fall. This means that the damage may be concentrated towards the wall’s base.

5. Window Caulking Damage

Do you see any cracks or gaps in the caulking around your windows? It also implies that water has permeated the stucco. You will also need to replace the windows if they have been there for an extended period. Because of this, regular stucco inspections are essential.

6. Soft Drywall

You’re going inside to continue your investigation. Feel for the drywall underneath your windows. Is it pleasant to the touch? That is another sign of water damage. In these cases, the drywall and the stucco on the outside will need to be replaced.

7. Basement Moisture

Finally, investigate the basement walls. You’ll notice that if the stucco includes water, it may cause moisture on the walls. However, since there are other possible reasons, you should rule them out before attempting to resolve the problem.